Glorystar telephone support team is available to provide telephone support for all brands not sold by Glorystar or Adventist Satellite. Generate test Cline for your desired scrambled channels and you will get the following information from Cccam Cline providers.It is a universal method to enter Cline in your receivers, some receivers have different menu options, but I hope you can manage to enter Cline according to these guidelines.

How to Add Cline in Satellite Receiver. The Glorystar telephone technical support team is available to provide telephone technical support for GEOSATpro and Fortec Star products at no charge. But wait there’s even more. After connecting Wifi to your receiver, follow below steps to add Cline in your receiver. Please refer to specific receiver manual for more detailed search option.To contract a local satellite technician to assist with the receiver programming, please visit a free satellite installer referral service online at 4021 Alvis Ct.

Updated 01/01/2017. sales@satelliteav.com (Frequencies for the free to air channels are available on a separate page on this site, called free to air frequencies)This next menu is where you enter all the frequency details ‚ ‚ ‚ ‚ 4) key in the frequency of the channel required, full stops are irrelevant, just input the frequency numbers,‚ ‚ 5) use the left/right keys to toggle between H (horizontal) or V (vertical) then press down key again‚ ‚ 6) use the left/right keys to toggle the Symbol Rate (27.5 or 22.0) then key down‚ ‚ ‚ 7) use the left/right keys to toggle the FEC (1/2 2/3 3/4 5/67/8) ‚ ‚ 8) once all the information has been entered, press the down key to go to find channels, then press select to start the search/find channels, ‚  ‚  ‚  ‚  ‚  after a few seconds a list of channels will appear, each frequency has more than one channel on it so don't worry when a long list of ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  channels appears‚ ‚ 9) scroll through the list of channels using the up/down keys, then using the yellow button to place a tick beside the channels you would like ‚  ‚  ‚  ‚  ‚ stored, when you have finished ticking, press select,‚ the channels you ticked are now stored and you will see the following menu.Repeat the procedure by pressing select for other channels/frequencies of interest, when you've finished press the sky button to exit all menus‚ To view channels stored, press services then 7 for other channels, then select the channel you wish to view by using the up/down and select buttons, pressing the channel down button takes you back to the regular sky channel/epg list‚ ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚  ‚ ‚ ‚ ‚ 2) press the left key twice until you see the options menu, ‚ ‚ 3) press the down key on the remote until the middle menu, ‚ ‚ 4) press the left key four times until add channels is highlighted‚ ‚ 5) press down key again, then the input boxes for the frequency details to be‚ keyed in appears‚ ‚ 6) key in the frequency of the channel required, full stops are irrelevant just key ‚ ‚ 7) use the left/right keys to toggle between h (horizontal) or V (vertical)‚ ‚ ‚ 8) use the left/right keys to toggle the Symbol Rate‚ ‚ ‚ 9) use ‚ the left/right keys to toggle the FEC (1/2 2/3 3/4 5/6 7/8 9/10)10) once all the information has been entered, press yellow to search channels, in a few seconds a list of channels will appear, don't worry, ‚  ‚  ‚  ‚  ‚  ‚ more than one channel broadcasts on the same frequency11) scroll through the list of channels, then using the yellow button to place a tick beside the channels you would like stored, when you have ‚  ‚  ‚  ‚  ‚  ‚ finished ticking press select, the channels you ticked are now storedRepeat the procedure for other channels/frequencies of interest‚ To view channels stored, press services, then press the down key, then press the right key four times, other channels should now appear, press the down key again, choose the channel you require, press select to view, pressing select again to view full screenIf‚ you have a FREESAT receiver you need to use the NON-FREESAT mode (please check the instructions that came with your receiver, I will try to post the tuning details for freesat receivers here in the future.If you have any other receiver you will need to consult ‚ the instructions that came with your receiver as all receivers have different menu layouts and it would be immposible to list them all here.If you are using using a Sky Digibox with the old blue card still in it or you are using your receiver without a card in it and you can't get CHANNEL 5, ITV, ITV+1, CHANNEL 4,‚ CHANNEL 4+1,‚ E4, E4+1, MORE 4, MORE 4+1, these channels are broadcast free to air too, it may only be that your viewing card is set for the encrypted versions of these channels, ‚ check out the frequencies page on this site and follow the instructions given above to add these channels.MORE TO COME ON THIS PAGE REGARDING SKY AND FREESAT ‚ IN THE NEAR FUTURE
If you have a GEOSATpro HDVR3500, HDVR1200, DVR1100c, DSR100c or 200c receiver, the Christian and family friendly channels will be automatically updated each week.. These keys are known as Cline. Many of the available British television channels are already available on the Sky TV Electronic Programme Guide (EPG) and Freesat TV Electronic Programme Guide (EPG) so you do not have to add or do anything. Many other channels are available on the Galaxy 19 satellite. Many other channels are available on the Galaxy 19 satellite.